SMD / SELECTION GUIDE

Addressable LED Strip Selection: SPI & DMX512

Choose a control route, then compare the exact IC, supply and segment configuration.

Compare control routes ↓Ask for selection advice →

Start with control, not LED density.

These routes lead to separate configuration tables. Match protocol, IC and segment requirements instead of mixing them into one generic model list.

SPI addressable strips

Compare the listed IC, color configuration and voltage-paired segment control. Do not assume every configuration controls one LED independently.

View published configurations: SPI addressable strips →

DMX512 strips

Compare the DMX512 configurations and their listed IC / SEG options. CRI 90 or CRI 95 is available on request across this series; neither is a default rating.

View published configurations: DMX512 strips →

1903 specialty strips

Keep the 1903 specialty configurations separate. Confirm the exact supply requirement and controller before selecting the strip.

View published configurations: 1903 specialty strips →

SK6812 / SK9822 specialty strips

Choose the listed IC and color configuration together. Confirm controller compatibility; similar product names do not establish an interchangeable configuration.

View published configurations: SK6812 / SK9822 specialty strips →

What to confirm before a sample or quote

Required color channels and effect
Exact IC or control protocol
Supply voltage and listed segment control
Cutting interval, wiring, installation length and power feed
Any signal-backup requirement — confirm for the selected configuration

Control notation does not by itself establish LEDs per segment or a signal-backup feature.

Discuss your project →Browse all SMD series →